FSCK Fender and Gibson

F!$k Fender and Gibson and F!$k Guitar Center too Is there any wonder why guitars are pieces of crap now and been getting worse for the past 30 years? They are? you say. Yep. Fender and Gibson through Guitar Center are selling throw away guitars for your snot nosed 16 year old wanna be. OK […]

Continue Reading
Strung up!

Telecaster refinishing Final

This entry is part 7 of 7 in the series Telecaster Refinishing

Assembled the telecaster guitar today. First I put the bridge on, then soldered the pickup and ground wires to the tone and volume knobs. Then I screwed on the face plate and pick guard.  Assembled the neck and strung her up with Elixir Nanoweb strings.  Adjusted the action and neck. She plays great! I would […]

Continue Reading
Telecaster body and neck

Telecaster Refinishing part 5

This entry is part 6 of 7 in the series Telecaster Refinishing

Just put on the last coat of finish on the guitar neck. I sanded off the old finish and sanded it up to 1200 grit. It’s glass smooth. I’d highly recommend anyone sanding down their neck, it’s wicked fast. Here’s a pic of the neck and body together, tomorrow starts the reassembly.

Continue Reading

Telecaster refinishing part 4.5

This entry is part 5 of 7 in the series Telecaster Refinishing

Applied 4 coats of finish, had a small problem with the first two coats being too think. I had to sand down to 320-400 before putting on coats 3 ad 4. My finishing mixture needs more boiled linseed oil, closer to equal parts linseed, tung and poly. The mixture works pretty good on a chair […]

Continue Reading
Telecaster back sanded up to 1200 and one coat oil/poly finish.

Telecaster refinishing part 4

This entry is part 4 of 7 in the series Telecaster Refinishing

Finished sanding the telecaster up too 1200 grit.  Then applied one coat of oil/poly finish. I’m using my own blend of 2 parts tung oil, 2 parts polyurethane and 1 part boiled linseed oil. Depending on how fast the finish builds up, I’ll put on 4 to 6 coats.   I wasn’t sure what the […]

Continue Reading
Close up of the Telecaster body showing before and after pore filler sanding.

Telecaster refinishing part 2

This entry is part 2 of 7 in the series Telecaster Refinishing

Seems that my iPhone and computer don’t want to play nice with each other with regards to movie files. So… I’m not sure what will happen with the video of my refinishing project. But here is a couple of pics of the telecaster after sanding off the pore filler. Getting the pore filler off is […]

Continue Reading

Powered by WordPress. Designed by WooThemes